The plate-type filter equipment has a super long life lining which adopted a new high-fused silica melting manufacturing technology. The box is mainly used for the melt purification of aluminum alloy products that with high added value and high technical performance requirements.
The results of filtration are determined by the specifications, quantities and the PPI of CFF. The diameter range of filtered impurities is 5μm-40μm and the range of aluminum impurities is ≤0.12mm²/kg-≤0.032mm²/kg (Detected by ABB off-line impurities tester).
The online heating system can preheat the CFF and concurrent heating in the production process, can also maintain the temperature of the molten aluminum.
The shell temperature can be maintained ≤65 ℃ with high-end insulation layer.
The box linings are made from high-fused silica, which have good performance such as non-stick aluminum, high corrosion resistance, no peeling off and longer service life. The service life of the box lining is more than 2 years according to the market feedback.
|
Standard Model |
Flow Rate (t/h）
|
Size of CFF（inch） |
Filtration efficiency |
Remarks
|
||
|
Single stage Filtration |
Double stage Filtration |
Single stage Filtration |
Double stage Filtration |
|||
|
EG-B-6 |
6 |
15' |
15'*2 |
30%-50%
|
60%-85% |
1. Higher filter accuracy has lower filter capacity. 2 . The filter capacity is reduced when the content of Mg is ≥1% in alloy. |
|
EG-B-10 |
10 |
17' |
17'*2 |
|||
|
EG-B-15 |
15 |
20' |
20'*2 |
|||
|
EG-B-25 |
25 |
23' |
23'*2 |
|||
|
EG-B-35 |
35 |
26' |
26'*2 |
|||
|
EG-B-45 |
45 |
26' |
26'*2 |
|||
|
23'*2 |
23'*4 |
|||||
|
EG-B-55 |
55 |
23'*2 |
23'*4 |
|||
|
EG-B-65 |
65 |
26'*2 |
26'*4 |
|||
